From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Modifications to the petrol tank and fuel feed system for cars with 4-wheel brakes.
| Identifier | ExFiles\Box 67\2\ scan0051 | |
| Date | 27th June 1924 | |
| To Hs.{Lord Ernest Hives - Chair} from R.{Sir Henry Royce} c. to CJ. BJ. RG.{Mr Rowledge} Wor.{Arthur Wormald - General Works Manager} DA.{Bernard Day - Chassis Design} E.{Mr Elliott - Chief Engineer} BY.{R.W. Bailey - Chief Engineer} PN.{Mr Northey} EP.{G. Eric Platford - Chief Quality Engineer} X8400 SECRET. R5/M27.6.24. EAC.11. PETROL TANK ETC. X.8460 X.9400 X.3575 A complete drawing has been made of various fittings round the petrol tank, including the tank protecting luggage grid. It is intended in this model with future EACs. to make this luggage carrier part and parcel of the chassis since we are now using it as a standard petrol tank guard for these cars with 4-wheel brakes. It will be noticed that with all cars with 4 wheel brakes we must as soon as ever possible, for the obvious reason of a rear puncture, adopt the vacuum system, and with a vacuum system we can use the RR. petrol lever indicator (which is not magnetic) and has not the defect of the magnetic gauge. It will be noticed that with vacuum feed it is much easier to ventilate the tank while filling, and perhaps the function of the special pipe provided for this ventilation can be embodied in some other pipes. It is intended also that with the vacuum feed we shall be able to fit a partition in the tank so as to embody a 2 gal. reserve. The possibility of a slight leak in the change-over cock seems of much less importance than with the pressure system, there being ample capacity in the suction of the engine to provide for any leakage that might naturally occur in a change-over cock. It will be noticed that the problems about the tank have therefore materially changed. R.{Sir Henry Royce} | ||