From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Problems with a petrol level indicator, including erratic readings and fuel leaks from the dial.
| Identifier | ExFiles\Box 75\2\ scan0100 | |
| Date | 10th February 1921 | |
| To R.{Sir Henry Royce} from Hs.{Lord Ernest Hives - Chair} c. to CH. c. to Bn.{W.O. Bentley / Mr Barrington} c. to E.{Mr Elliott - Chief Engineer} c. to Da.{Bernard Day - Chassis Design} c. to By.{R.W. Bailey - Chief Engineer} c. to EP.{G. Eric Platford - Chief Quality Engineer} X3888 Hs{Lord Ernest Hives - Chair}6/LG10.2.21. X.3888. PETROL LEVEL INDICATOR. We had trouble with the petrol lever indicator fitted to 4.EX Car whilst I was in the U.S.A. What appeared to happen was that over a very bumpy road, the needle would jump round 180°. This would mean that sometimes when the tank was empty it would be registering full and another time when the tank was nearly full it was registering empty. We took it to pieces and found everything O.K. but thought that the trouble might be overcome if we magnetized the bar connected to the pointer. At present this bar is instructed in soft iron. We made another bar at Springfield of hardened steel and magnetized it. This did not overcome the trouble. The gauge still jumped 180°. We took it apart and found that the bar had become demagnetized. We are rigging up another tank at Derby to carry out further experiments to see what is necessary to keep the indicator reading correctly. We also had trouble with the petrol leaking through into the front of the dial of the indicator. We had several goes at this joint but we were not successful in making it absolutely petrol-tight. We suggest that the indicator should be arranged so that it is impossible for Contd. | ||