From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Cost and operations sheet for manufacturing Pedal Gap Plates for the Phantom III.
| Identifier | ExFiles\Box 148\5\ scan0369 | |
| Date | 12th July 1938 | |
| 12. 7. 38. PEDAL GAP PLATES - PH.III. Phantom III. Pedal Gap Plate, F.89597/8., is of two piece construction, the two halves being bought out as die-castings at a cost of 2/6d each half. The operations etc. are as follows :- OP. NO. | OPERATION | SETTING TIME. | TIME ALL: | DIRECT LABOUR COST ---|---|---|---|--- 1. | Mill joint faces on each half for bolting together. | 45 m.{Mr Moon / Mr Moore} | 14 m.{Mr Moon / Mr Moore} Pr.{Percy H. Rose} | 2½d 2. | Drill holes for bolting together. | 30 m.{Mr Moon / Mr Moore} | 6 m.{Mr Moon / Mr Moore} Pr.{Percy H. Rose} | 1¼d 3. | Remove burrs & bolt together. | | 60 m.{Mr Moon / Mr Moore} Pr.{Percy H. Rose} | 9½d 4. | Drill holes in outer flanges & two holes (Sec:D.D.) in top face & drill 2 tapped holes in flat face. | | 20m. Pr.{Percy H. Rose} | 3¾d 5. | Spotface (Sec. D.D). | | 4½ m.{Mr Moon / Mr Moore} Pr.{Percy H. Rose} | 1¾d 6. | Countersink | | 3½ m.{Mr Moon / Mr Moore} Pr.{Percy H. Rose} | 1¼d 7. | Drill & csk. all inclined holes. | | 6½ m.{Mr Moon / Mr Moore} Pr.{Percy H. Rose} | 2½d 8. | Mill face for steering col. bracket. | | 6 m.{Mr Moon / Mr Moore} Pr.{Percy H. Rose} | 2¼d 9. | Tap. | | 4 m.{Mr Moon / Mr Moore} Pr.{Percy H. Rose} | 1¼d.{John DeLooze - Company Secretary} 10. | Remove burrs. | | 5 m.{Mr Moon / Mr Moore} Pr.{Percy H. Rose} | 1d £. s. d.{John DeLooze - Company Secretary} Material Cost............ 0. 5. 0. Direct Machine & Fitting Labour Cost.................... 0. 2. 3. Charges ................ 0. 4. 6. Total Factory Cost......... 0. 11. 9 | ||