From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Sketches of engine components including a camshaft bearing, con rod, big end, and oil pump.
| Identifier | ExFiles\Box 126\4\ scan0192 | |
| Date | 15th September 1937 guessed | |
| SKETCH XIII CENTRE CAMSHAFT BEARING WITH SKEW GEAR IN THE MIDDLE. O/DIA OF GEAR A LITTLE LESS THAN BEARING. .125 WIDE UNDERCUTS 5/8" 5/8 5/8 SKETCH XIV CON ROD .093 7.500 CENTRES 1/8" 5/8" 3/4 BIG END WILL PASS THRO CYLINDER BORE. SKETCH XV BIG END FITTED WITH OIL SCOOP. RETAINING PLATE FOR OIL SCOOP 3/4 .018 SHEET STEEL PRESSING 5/16 3/16 FOR ALL OTHER PARTICULARS OF BIG END AND OIL SUMP, SEE PAGE 40 OF THE CHEVROLET MANUAL SKETCH XVI CASING 3 1/2" DIA: STEEL PRESSING OIL PUMP SUCTION 20 MESH GAUZE WIRE RETAINING CLIP OIL PUMP IS DRIVEN FROM LOWER END OF DISTRIBUTOR DRIVE. | ||