From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Continued list of required stud or existing parts for section 705D.
| Identifier | ExFiles\Box 17\4\ Scan056 | |
| Date | 4th March 1933 | |
| -2- BY/HEB{H. Biraben}4/4.3.33.-Contd- STUD.OR EXISTING PARTS REQD:-Contd- SEC:705D. F.71840 Guide for Control Tubes. 1 off. F.83574 Locking Tab(Stationary Tube). 1 " F.71842 " (Control Tube Guide). 1 " F.71886/90 Adjusting Washer(Control Tube Guide). 1 " to suit. F.72601 Steering Worm. 1 " F.72843 Rocking Lever RH.{R. Hollingworth} 1 " F.72844 " " LH.{Mr Haworth} 1 " F.72847 Bolt for Rocking Levers. 4 " F.72857 Distance Piece(Rocking Shaft). 1 " F.72859 Bush in Steering Box. 1 " F.72864/B Packing Washer(Rocking Shaft)Small. 1 " to suit. F.72869/73 " " " " )Large. 1 " F.73061 Stud for Bottom Bracket. 2 " F.70300 Steering Nut. 1 " E.4100 Nut for Steering Box. 6 " E.4100 " " Column Support Bracket. 2 " E.1965 Washer(Steering Wheel Spindle). 1 " D.71084 Stud(Steering Column Bracket)Lower. 2 " G.{Mr Griffiths - Chief Accountant / Mr Gnapp} 848D Screw( " " " ). 1 " G.52299 Nut for Ball Pin. 2 " G.77869 Locating Washer(Ball Pin). 1 " F.{Mr Friese} 608 Distance Piece for Carb:Lever. 2 " F.{Mr Friese} 7208 Screwed Pegs for Control Tube Brackets. 6 " F.57709 Pin(Carb: Control Bracket). 2 " F.57753 Carburetter Control Bracket. 1 " F.57754 Screw for locking Plate(Steering Wheel). 4 " F.27156 Stop for Felt Packing. 1 " F.70615 Lock Washer for Ball End Pin. 1 " F.72711 Knob for Control Levers. 2 " F.73072 Bush for Governor Control Tube. 1 " F.73073 " " Ignition " " 1 " F.73960 " " Carb: " 1 " F.75505 Joint Washer(Control Tube Guide). 2 " F.76842/5 Packing(Steering Column Support). 1 " to suit. F.84861 Packing Strip(Stationary Tube). 1 " F.77658 Screw for Ball End Pin. 1 " F.77901 Packing for Bracket on Dash. 1 " F.85100 Adaptor for Lubricator. 1 " F.79776 Lock Washer(Pendulum Lever Nut). 1 " F.79777 Bush in Sleeve( " " End). 1 " F.79820 Lock Washer(Oil Pipe Adaptor). 1 " F.80412 Stud for Control Plate. 2 " F.80417 Distance Piece for Control Plate. 2 " F.80464 Plunger for Control Levers. 2 " F.80465 Carb: Control Spring. 1 " F.80470 Stud(Control Plate Holder). 1 " F.80567 Ball End Pin. 2 " F.80568 Banjo Connection(Pendulum Lever). 1 " F.80569 Nut for Ball End Pin. 1 " F.80570 Cap(Nut for Ball End Pin). 1 " -Contd- | ||