From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
New drawings for the Internal Axle Control Sphere on the 40/50 HP Chassis Universal Joint.
| Identifier | ExFiles\Box 66\4\ scan0291 | |
| Date | 26th March 1919 | |
| [Strikethrough]Technical Bills from BY/C. To:- Mr. [Strikethrough]Swete. C. to:- Mr. Coventry. C. to:- Mr. Hulls. C. to:- Mr. [Strikethrough]Oliphant. C. to:- Mr. [Strikethrough]Littlejohn.[/Strikethrough] c. to E.F.C. March 26th; 1919. BY/CG/GMK26.3.19. X.3324. 40/50 HP CHASSIS - UNIVERSAL JOINT. Please receive herewith the following drawings :- G.6892 - Internal Axle Control Sphere (R.H) G.6893 - (L.H) These should be instructed as standard for Series "J.K.L. & M" in place of - G.468/9. We should point out however that the old pieces - G.468/9 can be used to make the new ones, providing the outside surface of the spheres have not been undercut, as it will be noticed the only difference is that the undercut has been left out on the new type. It is important that the above are put in hand immediately, therefore, will Mr. Moon kindly give the matter preference along with the Outer Spheres. The usual full set of blue prints should be issued, and the tracings returned to this Department. BY/C. | ||