From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Status list of drawings and modifications for the Wraith Chassis components.
| Identifier | ExFiles\Box 30\3\ Scan130 | |
| Date | 16th March 1935 | |
| - 17 - BY.1/G.16.3.35. WRAITH CHASSIS. LeC.4268 Layout of Frame Transmission & Springs........... Recd. 22.12.34. Detail drawings are in hand. LeC.4274 Rear Wheel Arches......................... Recd. 4.1.35. Detail drawings not required. N.Sch.4309 Servo for Semi-Servo System............... Recd. 28.12.34. Detail drawings will be put in hand as soon as possible. LeC.4246 Camshaft Wheel & Front End................. Recd. 12.12.34. Detail drawings will be put in hand as soon as possible. LeC.4360 General Arrangement........................ Recd. 21.2.35. Detail drawings not required. LeC.4187 Vertical Piston Double Downdraught Carb......... Recd. 3.1.35. LeC.4280 Oil Gallery Pipe Crankcase Webs., and Joint Face. Recd. 31.1.35. LeC.4289 Suction Oil Pipe Filter & Bottom Half Crankcase. Recd. 15.1.35. LeC.4293 Oil Pump................................ Recd. 31.1.35. LeC.4297 Fan & Fan Drive.......................... Recd. 21.1.35. LeC.4306 Oil Level Indicator Drain Cock & Filler......... Recd. 15.1.35. LeC.4308 Modified Oil Supply to Rockers............... Recd. 15.1.35. LeC.4309 Radiator Top Water Connection................ Recd. 21.1.35. LeC.4310 Water Temperature Regulator................. Recd. 21.1.35. LeC.4312 Inlet Pipes, Exhaust Manifold & Heater.......... Recd. 18.1.35. LeC.4321 Drive for Central Ignition Governor & Distributor.Recd. 31.1.35. LeC.4322 Ignition Coils & Wiring Tubes. Rt.Hd.{Mr Hayward/Mr Huddy} side of engine.Recd. 31.1.35. LeC.4323 Ignition Coils & Wiring Tubes Lt.Hd.{Mr Hayward/Mr Huddy} side of engine and plan.................................. Recd. 31.1.35. LeC.4325 Dynamo Cradle & Fixing................... Recd. 31.1.35. LeC.4326 Automatic Adjustment for Idler Gear.......... Recd. 31.1.35. LeC.4327 Camshaft Wheel & Front End................. Recd. 31.1.35. LeC.4328 Oil Trough for Idler Gear.................. Recd. 31.1.35. LeC.4332 Oil Relief Valves & Pressure Filters......... Recd. 31.1.35. LeC.4333 Oil Pump & Dynamo Drive & Front Distributor.... Recd. 31.1.35. LeC.4334 Water Pump & Dynamo Drive.................. Recd. 31.1.35. N.Sch.4332 Clutch Casing & Operating Shaft........... Recd. 15.1.35. N.Sch.4338 Modfn. to Clutch operating Mechanism to reduce cost................................... Recd. 15.1.35. N.Sch.4346 3rd. Motion Shaft as N.Sch.4206 but with thicker flange.............................. Recd. 19.1.35. N.Sch.4351 Removal of Clutch with engine in position. Recd. 6.2.35. N.Sch.4362 Removal of Lower Half Casing with engine in position. 6.2.35. Detail drawings will be put in hand as soon as possible. | ||