Standardisation of 'Maconite' High Tension Cable, considering test results and cost comparison.
| Identifier | ExFiles\Box 168\1\ img023 | |
| Date | 14th February 1926 | |
| EFC. {E. Fowler Clarke - Electrical Engineer} from ROY. {Mr H. Royce - Buyer} X3860 ROY {Mr H. Royce - Buyer} 1/MG214.26 Kindly advise if you are in a position yet to express any definite opinion as to the standardisation of "Maconite" High Tension Cable guaranteed within a diameter of 7 m {Mr Moon / Mr Moore} /m minus .25 m {Mr Moon / Mr Moore} /m, used for the High Tension Ignition Leads on the Chassis. I think the results of the exhaustive tests made by the Macintosh Company, which we saw at their Works recently, convinced us all that they had something exceptionally good here. As far as cost is concerned, the "Maconite" High Tension Cable comes out approximately 30/- per thousand yards over our present standard High Tension Cable. ROY {Mr H. Royce - Buyer} | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).