Rolls-Royce Archives
         « Prev  Box Series  Next »        

From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Specifications and sourcing of a steering system for the Spectre model, comparing it to Cadillac and La Salle systems.

Identifier  ExFiles\Box 170\2\  img221
Date  3rd December 1934
  
To E.{Mr Elliott - Chief Engineer} from Hs{Lord Ernest Hives - Chair}/Rm.{William Robotham - Chief Engineer}
c. to Nor.
c. to Da.{Bernard Day - Chassis Design}

Hs{Lord Ernest Hives - Chair}/Ru.4/KW.3.12.34.

SpectreCodename for Phantom III Steering.

We have been endeavouring to get a steering for the SpectreCodename for Phantom III similar to that fitted to the Cadillac 16, in order that we may see if we can reproduce their freedom from road shocks. The La{L. A. Archer} Salle steering at present fitted to the SpectreCodename for Phantom III is not so reversible as the Cadillac 16 steering.

As the La{L. A. Archer} Salle steering fitted conveniently into the SpectreCodename for Phantom III, we were trying to get a box on the same lines. We have received the following cable from Olley :-

"TRUE HELIX CADILLAC EIGHT SEVEN FORTY SEVEN LASALLE FIVE FIFTY SEVEN STOP CADILLAC NOT AS IRREVERSIBLE AS LASALLE HAVE WRITTEN RECOMMENDING REDUCE WHEEL FIGHT BY STABILISER FRONT INSTEAD OF REAR".

We cannot quite understand Olley's remark that the La{L. A. Archer} Salle steering has a helix angle of 5.57 because we have measured the one we are using and its helix angle is 7½o.{Mr Oldham} We are cabling this information to him, and telling him that if his figure for the La{L. A. Archer} Salle he is proposing to send us is correct it is just what we want.

Hs{Lord Ernest Hives - Chair}/Rm.{William Robotham - Chief Engineer}
  
  


Copyright Sustain 2025, All Rights Reserved.    whatever is rightly done, however humble, is noble
An unhandled error has occurred. Reload 🗙