From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Revised lubrication scheme for the Goshawk 11 dynamo bearings.
| Identifier | ExFiles\Box 51\1\ Scan052 | |
| Date | 28th May 1935 | |
| x 4383 To Mr. from E.{Mr Elliott - Chief Engineer} C. to Mr. C. to Mr. er. C. to Mr. Ha. C. to Mr. S. X.4383. GOSHAWK 11. DYNAMO. Lec. 1519. We expect by now that you have received further copy of above drawing, shewing the completion of the scheme. With regard to the lubrication of the dynamo bearings we had at first intended that this should take place at the same time as the couplings were lubricated, and that the operator should squirt with a syringe into a hole shewn leading into the idle key-way, of the coupling. This however may not be very satisfactory and it seems better to fit a lubricator to each dynamo bearing, retaining the existing one at the rear end within the cover, and adding a similar lubricator to the front end as shewn in the sketch attached. (Lec 1519) Would you kindly instruct this point. E.{Mr Elliott - Chief Engineer} [STAMP] RECEIVED 28 MAI 1935 H8 [/STAMP] | ||