Rolls-Royce Archives
         « Prev  Box Series  Next »        

From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Instructions for modifying S.S. Intermediate Output Armatures by adjusting commutator connections and angles.

Identifier  ExFiles\Box 60\1\  Scan124
Date  21th September 1929
  
X6004

RHC.{R. H. Coverley - Production Engineer} from EFC.

EFC1/AD21.9.29.

6004
X.8665. S.S. INTERMEDIATE OUTPUT ARMATURES.

We are handing to Mr.Tooby, two of the S.S. intermediate output armatures. Will you please arrange for the commutator connections on both these armatures to be moved one segment so as to increase the B angle at present 10° to 17.5°, and reduce the M angle from 45.5° to 38°. This involves the shortening of the top connections by one segment and the stretching of the bottom connections by the same amount, except in the case of the lap coil where the reverse is the case.

EFC.
  
  


Copyright Sustain 2025, All Rights Reserved.    whatever is rightly done, however humble, is noble
An unhandled error has occurred. Reload 🗙