Rolls-Royce Archives
         « Prev  Box Series  Next »        

From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
List of parts and modifications for the transmission shaft, rear axle, and rear brakes.

Identifier  ExFiles\Box 169\4\  img071
Date  7th November 1932
  
-8- RHC{R. H. Coverley - Production Engineer}/WSC{W. S. Cassel}3/AP.7.11.32

Transmission Shaft LOP. G.100909 - N.S. 3530 - G.L.605

Complete to the above LOP & Scheme.
G.100908 Transmission Shaft (S/ZN).
Not hardened on Splines.
G.100904. Coupling Flange.
G.100906. Bearing Housing.
G.100898. Ball Bearing - Transmission Shaft.

Rear Axle LOP. G.100277 - RR. Sche. 224-235.

Axle No. 2. Per. 11. - 9x46 Ratio No. 1

Complete to the above LOP - the following modification incorporated:-

Screwed Housing Type Crown Wheel Adjusting deleted and Plain Housing with Washer substituted to Arrgt Ex. 9557.
Ex. 9558 Housing Ex. 9559 Adj. Washer.
Ex. 9560 Nut Ex. 9561. Inner Piece.
Ex. 9562. Outer Piece.

The following parts fitted in conjunction with Wider Brake Drums (REAR)
2 -G.100982. Spring Suspension Bracket.
G.100983/4. Rear Axle Tubes.

Rear Brakes - RR. Scheme 235.

Wider Rear Brake Shoes to RR. Sch. 235
G.100964/5 Brake Straps - Foot - not machined on outside dia. Ferodo Bonded Asbestos Brake Shoes G.100976 fitted direct on to unmachined surface.
G.100966/7 Carrier Plates.
G.100968 Auxiliary Strap.
G.100978/9 Bearing Tube Act. Shaft.
G.100985. Spring Anchorage.
G.100990. Assembly of Bearing Tubes.

-continued-
  
  


Copyright Sustain 2025, All Rights Reserved.    whatever is rightly done, however humble, is noble
An unhandled error has occurred. Reload 🗙