Rolls-Royce Archives
         « Prev  Box Series  Next »        

From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
The required parts for the Front Axle Control Damper, specifically for the E.A.C. 7 chassis.

Identifier  ExFiles\Box 12\1\  01-page062
Date  12th January 1928
  
c. Hs{Lord Ernest Hives - Chair}/Rm.{William Robotham - Chief Engineer}
X7420
BY/HEB{H. Biraben}5/M.12.1.28.

E.A.C. 8. CHASSIS
E.A.C 14. CHASSIS
FRONT AXLE CONTROL DAMPER SEC:7160.

With reference to our memo BY/HEB{H. Biraben}6/M3.1.28, kindly note if it is desired to use the EAC.7. Anchorage Brackets F.76502/3, then it is essential to use the Standard Shafts F.76818 and F.76381.

If the Standard Anchorage Brackets are used then Shafts F.78253/4 should be fitted, as stated in the above memo.

BY/HEB.{H. Biraben}
  
  


Copyright Sustain 2025, All Rights Reserved.    whatever is rightly done, however humble, is noble
An unhandled error has occurred. Reload 🗙