Rolls-Royce Archives
         « Prev  Box Series  Next »        

From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Requesting technical drawings for a Bent Front Pan, crossmember, and other engine components.

Identifier  ExFiles\Box 113\5\  scan0168
Date  29th March 1944
  
To :- Rm{William Robotham - Chief Engineer}/HH.
C.c. Wym.{G. Harold Whyman - Experimental Manager}
C.c. Rm.{William Robotham - Chief Engineer}

1010 (e)

Chasis

EM/Les.3/JB.29.3.44.

BENT FRONT PAN.

Thank you for your Rm{William Robotham - Chief Engineer}/HH.3/MA.24.3.44, sending prints of the main front pan pressing FW.1827.

I still require, however, the prints of the remaining parts of this front crossmember which differ from the normal B.V. Frame.

Besides the three pressings which bolt on underneath the main crossmember there are also incidental pressings which I believe have to be assembled inside the crossmember, before it is fitted to frame.

No doubt you will also look into the matter of the Starting Handle Bracket which may have to be fitted in advance.

Will you please let me have three prints of the following drawings :-

EB.3956 - Gear.
EB.912 - Rocker Cover,

also three prints of the Tappet Cover.

EM/Les.{Ivan A. Leslie}
  
  


Copyright Sustain 2025, All Rights Reserved.    whatever is rightly done, however humble, is noble
An unhandled error has occurred. Reload 🗙