From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Specification of production adjustment for a combined main switch and auxiliary switch unit, version 4.
| Identifier | ExFiles\Box 64\4\ scan0186 | |
| Date | 27th February 1929 | |
| x7655B 27.2.29. F.{Mr Friese} 4 X.7655B. COMBINED MAIN SWITCH & AUXILIARY X.7781. SWITCH UNIT. SPECIFICATION OF PRODUCTION ADJUSTMENT. VERSION 4. 1. ADJUSTMENT. (1) Assuming that the armature stop pieces on the main and auxiliary levers have been duly adjusted to their correct values of .012", the first adjustment of the combined system consists in arranging the relation of the main switch lever side arm to the continental bakelite packing piece on the auxiliary switch lever to give the condition that when both levers arrive at their fully down switch positions, there is .010" clearance between the main/lever side arm and the bakelite packing piece. This means that the relay switch lever has a further travel of .010" measured on the core centre line, after the main switch lever is down on its stop. (2) Now insert a .030" non-magnetic distance piece between the armature and core stop of the main switch lever and with the lever suitably held down (electrically if desired) to this distance piece, adjust and secure laminated copper contact arm so that the last pair of laminations to make contact are just in contact with the plain copper contact. This will mean that every individual copper contact becomes compressed at least .041" Cont'd.{John DeLooze - Company Secretary} | ||