Rolls-Royce Archives
         « Prev  Box Series  Next »        

From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Letter to Vandervell Products Ltd. regarding the cost of big end bearings and standardising material thickness.

Identifier  ExFiles\Box 115\2\  scan0527
Date  26th January 1940
  
1020

RM{William Robotham - Chief Engineer}/CTS.{C. Trot Salt - Carburation}3/JH.

26th. January, 1940.

Vandervell Products Ltd.,
Western Avenue,
Park Royal,
W.3.

Dear Sirs,

With reference to the big end bearings we have been using in your material.

You have quoted 11/- per set of 6 bearings, if we use your standard thickness of material.

We are trying various ways to cope with this problem, and the obvious question which comes to mind is, what would be the tool cost to standardise a peculiar thickness, that we might specify, and would this enable you to maintain your above quotation.

Yours faithfully,
FOR ROLLS-ROYCE LTD.
  
  


Copyright Sustain 2025, All Rights Reserved.    whatever is rightly done, however humble, is noble
An unhandled error has occurred. Reload 🗙