From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Modifications to the wheelcase, throttle governor, and induction pipe for the EAC.10 engine.
| Identifier | WestWitteringFiles\S\2April1928-June1928\ Scan070 | |
| Date | 4th May 1928 | |
| BY.{R.W. Bailey - Chief Engineer} FROM E.{Mr Elliott - Chief Engineer} C. to BJ. HS.{Lord Ernest Hives - Chair} ORIGINAL EAC.10. WHEELCASE & THROTTLE GOVERNOR. X7140 X7120 / X7080 X7070 We send herewith LeC. 2556. shewing the throttle governor control, and giving particulars of modifications to the wheelcase and standard throttle governor to suit this engine. You will notice that we have been compelled to slightly modify the outline of the wheelcase to obtain an adequate oil supply for the trough lubricating the governor. In this design we have also modified the outline of the governor casing, enabling the fan to sweep in front of the governor. The position shewn on this drawing of the fan centre we are informed by "CamachaHenry Royce's office in West Wittering" is suitable for EAC. 10. Further designs will follow giving particulars of the remainder of the throttle control. Regarding the induction pipe for EAC. 10. we are increasing the dia. of the uptake from 2" to 2 1/4", as also the carburetter throttle valve. E.{Mr Elliott - Chief Engineer} | ||