From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Suggestion for a roller bearing sliding joint on the propeller shaft, designed for the Peregrine car.
| Identifier | ExFiles\Box 148\4\ scan0018 | |
| Date | 28th January 1933 | |
| X484 BY.{R.W. Bailey - Chief Engineer} FROM DA.{Bernard Day - Chassis Design} DA{Bernard Day - Chassis Design}2/M28.1.33. C. to SG.{Arthur F. Sidgreaves - MD} WOR.{Arthur Wormald - General Works Manager} HS.{Lord Ernest Hives - Chair} E.{Mr Elliott - Chief Engineer} PROPELLER SHAFTS. X.484 X.4027. Herewith is N. scheme 3647 shewing a suggestion for a roller bearing sliding joint on the propeller shaft which was recently made by R.{Sir Henry Royce} We think the drawing is self explanatory. Of the two types of cage shewn we think we prefer the upper one. If it is found that the needle bearing universal joint - which we believe is practically universal in America - is a success, the use of this roller bearing slider would mean that very little attention to the lubrication of the propeller shaft is needed. We have drawn the joint suitable for the Peregrine but of course it can be easily adapted to another car. DA.{Bernard Day - Chassis Design} | ||