Rolls-Royce Archives
         « Prev  Box Series  Next »        

From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Letter to Ferodo Ltd. regarding the development and testing of clutch plates with moulded friction fabric for 40/50 HP and 20 HP cars.

Identifier  ExFiles\Box 26\4\  Scan295
Date  20th April 1926
  
X5489-X719

Expl: Dept:
20th. April 1926.

Hs{Lord Ernest Hives - Chair}/Rml/LG.

Messrs. Ferodo Ltd.,
Sovereign Mills,
Chapel-en-le-Frith,
England.

Dear Sirs,

For the attention of Mr. Field.

We are forwarding to you - 2 Clutch Plates for our 40/50 HP. car.

A few days ago Mr. Field visited us and showed us a number of clutch plates upon which the friction fabric was moulded.

We should be obliged if these clutch plates could be treated in this manner, and if possible, the same material used as is at present employed on our friction clutch discs.

One important point in connection with these discs is that their finished thickness should not exceed .312".

As we are anxious to get some tests through on this type of clutch plate, we should be obliged if you could expedite the delivery of these clutch plates, and also those for the 20 HP. which we have previously handed to you.

Yours faithfully,
  
  


Copyright Sustain 2025, All Rights Reserved.    whatever is rightly done, however humble, is noble
An unhandled error has occurred. Reload 🗙