From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Correspondence regarding the development and testing of an experimental K.S. petrol gauge unit.
Identifier | WestWitteringFiles\U\August1930-November1930\ Scan003 | |
Date | 4th August 1930 | |
From Hs{Lord Ernest Hives - Chair}/Sn.{Mr Sanderson} ORIGINAL Hs{Lord Ernest Hives - Chair}/AM4/4.8.30. X4038 K.S. PETROL GAUGE. you will recollect that in De/EVL/1S27.6.30 you asked us to alter the K.S. petrol gauge to make it suitable for a centrally vented tank with a lower filler cap. subsequently in D/AL.7.30 you decided that it was not worth re-designing the tank for the advantages we should gain, and furthermore we thought that with a single line installation it would never be possible to ensure that the gauge would not be upset should positive pressure be built up in the tank when filling with fuel. However, before this latter decision was made we had taken the matter up with Messrs. Hobson the manufacturers of the gauge and a tank unit has since been evolved which has the prospect of being more successful than anything we have hitherto tried. We are sending this tank unit to you under separate cover for your examination. It is only an experimental unit and therefore cannot be considered to be up to standard either with regard to design or finish. This unit has been tested in a sealed tank completely filled with petrol coupled up with a single | ||