From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Work instruction list for modifications to a Wraith Car 24.G.V1.
| Identifier | ExFiles\Box 6\6\ 06-page358 | |
| Date | 14th October 1937 | |
| To HPS.{Horace Percy Smith - Experimental Factory Mgr} from Rm{William Robotham - Chief Engineer}/Wym.{G. Harold Whyman - Experimental Manager} 600 Rm{William Robotham - Chief Engineer}/Wym.{G. Harold Whyman - Experimental Manager}1/AP.14.10.37 WRAITH CAR 24.G.V1. We are sending the above car into the Fitting Shop for the following work to be done:- Fit new offset raised front engine mounting. Fit torque reaction damper to N/S. of engine and frame. Remove oil seals from rear axle. Fit new centre steering lever, and rear side steering tube joint as per Rm{William Robotham - Chief Engineer}/FJH.{Fred J. Hardy - Chief Dev. Engineer}3/MH.{M. Huckerby}8.10.37. Fit duprene damper glands to rear dampers as per Rm{William Robotham - Chief Engineer}/Les.15/MH.{M. Huckerby}29.9.37. Fit rubber lower yoke bearing N.Sch.5110 as per Rm{William Robotham - Chief Engineer}/Les.14/MH.{M. Huckerby}29.9.37. Attend to brakes as per Rm{William Robotham - Chief Engineer}/AFM.{Anthony F. Martindale}1/MH.{M. Huckerby}14.10.37. Rm{William Robotham - Chief Engineer}/Wym.{G. Harold Whyman - Experimental Manager} | ||