Rolls-Royce Archives
         « Prev  Box Series  Next »        

From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Requesting the fitting of steering components and rectification of a rattling horn button on chassis 25-G-VI.

Identifier  ExFiles\Box 9\7\  07-page083
Date  29th September 1937
  
X 650.

To HPS.{Horace Percy Smith - Experimental Factory Mgr} from Rm{William Robotham - Chief Engineer}/FJH.{Fred J. Hardy - Chief Dev. Engineer}
c. Wym.{G. Harold Whyman - Experimental Manager}

Rm{William Robotham - Chief Engineer}/FJH.{Fred J. Hardy - Chief Dev. Engineer}19/MH.{M. Huckerby}29.9.37.

25-G-VI. STEERING.

The rear joint of the side steering tube and the cross steering tube joints of the above chassis are not up to date.

Will you please fit the following -
(1) Rear side steering tube joint to Rm.{William Robotham - Chief Engineer}339
(2) Cross steering tube ball pins to FW.1518.

The horn button on this chassis rattles badly due to its not resting on all four locating screws in the off position. Will you please rectify this also.

Rm{William Robotham - Chief Engineer}/FJH.{Fred J. Hardy - Chief Dev. Engineer}
  
  


Copyright Sustain 2025, All Rights Reserved.    whatever is rightly done, however humble, is noble
An unhandled error has occurred. Reload 🗙