Rolls-Royce Archives
         « Prev  Box Series  Next »        

From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Extract concerning coachbuilder complaints about dashboard alignment and a note on floorboard stiffening.

Identifier  ExFiles\Box 14\4\  Scan083
Date  15th July 1930
  
EXTRACT FROM :- X. 7500. DA{Bernard Day - Chassis Design}/EVL/M15.7.30.

BY.{R.W. Bailey - Chief Engineer} Hs.{Lord Ernest Hives - Chair}
c. C. Wor.{Arthur Wormald - General Works Manager}
c. EP.{G. Eric Platford - Chief Quality Engineer} JLE.{J. Lee Evans - Chassis Test Manager}

X.7770.
X.5770.

(4) P.2. DASHBOARD. Coachbuilders still complain that our dashboard is not square with the centre axis of the chassis frame and that it does not stand upright. We do not know whether you have adopted R's suggestion of some years ago whereby a jig is dropped over the chassis frame, and the dashboard is held against its face while its fixing bolt holes are drilled, and the dash is bolted up. We think this is the only way of making sure that the dashboards are really square with the central axis of the chassis frame.
(11) P.2. FLOORBOARDS. We have already sent you some instructions for stiffening the front floorboards, and we think these will go a long way to meet the complaints.
  
  


Copyright Sustain 2025, All Rights Reserved.    whatever is rightly done, however humble, is noble
An unhandled error has occurred. Reload 🗙