From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Recommendations on axle ratios based on car weight, destination, and customer preferences.
| Identifier | ExFiles\Box 12\2\ 02-page025 | |
| Date | 1st January 1928 | |
| To BY.{R.W. Bailey - Chief Engineer} from Hs{Lord Ernest Hives - Chair}/Rn.{Mr Robinson} c. to Sg.{Arthur F. Sidgreaves - MD} c. to Hm.{Capt. W. Hallam - Head Repairs} X7350 Hs{Lord Ernest Hives - Chair}/RnL/LG9.1.28. AXLE RATIOS. X8350 X7350 Though we have standardised the 14-tooth axle, we do not recommend that this should be utilised without discretion. Our opinion on axle ratios is as follows :- (a) Cars over 50 cwts. wt. unloaded for Spain, Australia, and British conditions all 14-tooth axles. (b) All cars for the Continent other than Spain, and cars under 50 cwts. unladen for Spain, Australia and Britain 15 tooth axles. (c) EAC.14 standard axle ratio 16-tooth. Special request for super-speed enthusiasts 17-tooth. The whole of these recommendations are subject to modification to meet the requirements of exceptional customers who have a craving for one particular type of performance. Hs{Lord Ernest Hives - Chair}/Rn.{Mr Robinson} | ||