Rolls-Royce Archives
         « Prev  Box Series  Next »        

From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Progress report and specification sheet listing actions for various vehicle components.

Identifier  ExFiles\Box 30\1\  Scan074
Date  15th November 1934
  
- sheet 6 -

Rear Shock Damper. Proceed with three sets as first car but using conical mounting in accordance with N. Sch.4110 and Hdy.{William Hardy}1/HP.15.11.34.

Stabiliser. Await result of test, on second car, of rebound check LeC.4139.

Governor Unit. Go ahead with three sets having the Phantom II type of internal suction filter

Governor Control. Proceed with three sets like the first car.

Pressure Piping. Proceed with three sets like the first car.

---------

"D" SECTION.
-----------

Petrol Pump. Proceed with three sets like first car (Expl. Department to carry out tests with pumps rubber mounted).

Luggage Carrier. Investigation required on this section with reference to outside petrol tank filter.

Instrument Board. New design of layout is in hand - RR.Sch 732/799. Do not make any more similar to the first car.

Batteryand Fittings. See Frame & Fittings with reference to Battery box crossmember etc.

Wiringand Fittings. Two sets similar to the first car.

Spare Wheel Carrier. Two sets similar to the first car; a modified design is required.

Starter Motor Complete. Proceed with three sets like the first car.

Automatic Switch. -do-

Dynamo Complete. Proceed with two sets like the first car, a ventilated scheme is in progress.
  
  


Copyright Sustain 2025, All Rights Reserved.    whatever is rightly done, however humble, is noble
An unhandled error has occurred. Reload 🗙