From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Specification sheet for vehicle components, listing descriptions, design numbers, and remarks.
| Identifier | ExFiles\Box 118\1\ scan0384 | |
| Date | 17th January 1941 | |
| SPECIFICATION SPECIFICATION NO PL 3004 ISSUE NO 1 SHEET NO 7 SEC NO | TITLE | DESCRIPTION | DESIGN NO | DETAILS | L.O.P. | REMARKS --- | --- | --- | --- | --- | --- | --- 6050 | 2ND MOTION SHAFT | RATIONALISED. STANDARD RATIO WITH S/ZNC CLUSTERS. TIMKEN BEARINGS. TO SUIT REVISED GEARBOX. STRENGTHENED GEARS. 2ND MOTION SHAFT IN S/ZNX. | PL.65 PD 477/8 | | RG.{Mr Rowledge} 195 | 6070 | REVERSE GEAR | RATIONALISED. TO SUIT REVISED GEARBOX. | PL. 65 | | RG.{Mr Rowledge} 196 | 6080 | CHANGE GEAR MECHANISM | RATIONALISED. AS STANDARD B.V. BUT WITH NEW GATE (REVERSE SLOT SHORTENED). | | | RG.{Mr Rowledge} 359 | 6081 | HAND BRAKE MECHANISM | BOWDEN OPERATED PAWL. INCREASED HAND BRAKE TRAVEL. | GCD 1366 GCD 913. | | RG.{Mr Rowledge} 414. | 6091 | REAR BRAKE INTER. SHAFT | TO SUIT HYDRAULIC MASTER CYLINDER, WITH MODIFIED PULL RODS. | GCD 1339 | | RG{Mr Rowledge} 802 | 6110 | PROPELLER SHAFT | PROP SHAFT WITH SMALL JOINTS (JOINT NO T 1300). CENTRE BEARING TO | PL. 164. GCD 1481 GCD 1464 | | RG{Mr Rowledge} 763 | 6120 | REAR AXLE | RATIO 4.56:1 - BEVEL AND PINION IN S/ZN - 1.531 DIA. SHAFT. STRENGTHENED CENTRE CASING. DRAIN HOLES IN END PLATES. SELF SEAL BEARINGS AND PARALLEL RH{R. Hollingworth} DIFF. BEARINGS. WELDED ON SPRING SEATS. MODIFIED POSN OF OIL FILLER (FOR ACCESSIBILITY). | GCD 1482. GL{G. Linnett} 890. PL. 123 142/B PL. 128 | | | DESIGN REQUIRED FOR BEVEL AND PINION. BASICALLY TO L.O.P. RG{Mr Rowledge} 764. DESIGN REQUIRED. Footer: R.R.888 (2M) (39732 - 17-1-41) N & G.{Mr Griffiths - Chief Accountant / Mr Gnapp} LTD. | ||