From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
List of instructions for adjusting the front axle, springs, and steering components.
| Identifier | ExFiles\Box 80\2\ scan0113 | |
| Date | 12th April 1920 | |
| Contd. -2- R2/G12.4.20. front axle so that its vertical movement relative to the frame has no effect on the length of side steering tube to do this latter. (5) Put slightly more camber in the front spring (say for 1/2" to 1" normal). (6) Temporarily fit links to front end of spring and anchor axle by rear end of spring, placing side tubing in best relative position, i.e. horizontal with springs without camber. (7) Go the whole hog and fit radius rods the same length as steering tube and fit spring links at both ends of the springs. (8) Let us do this in a temporary manner, and let me know without delay the results. [STAMP] 1804 [STAMP] MADE AT CHORLEY R.{Sir Henry Royce} PN{Mr Northey}5/DBS.4.20.) CX{Major Len W. Cox - Advertising Manager}12/WM19/2/20) returned herewith. CX{Major Len W. Cox - Advertising Manager}8/WM6/2/2/20 ) [UPSIDE DOWN TEXT AT BOTTOM] R.R. 235A (100 T) (S.E. 846. 6-8-19) G.{Mr Griffiths - Chief Accountant / Mr Gnapp} 2460. | ||