Rolls-Royce Archives
         « Prev  Box Series  Next »        

From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
The parts required for the M.40 Test Rig's front suspension bump and rebound buffers.

Identifier  ExFiles\Box 110\2\  scan0044
Date  10th June 1941
  
727
To Rm.{William Robotham - Chief Engineer} from Rm{William Robotham - Chief Engineer}/HH.
c. to Ev.{Ivan Evernden - coachwork}
c. to Ev{Ivan Evernden - coachwork}/JD.{J. Draper - Frames}

Rm{William Robotham - Chief Engineer}/HH.3/SW.10.6.41.

M.40 Test Rig.

PL.420 - Bump & Rebound Buffers. Front Suspension.

Sec.7000 - Frame & Fittings.

Further to our memo reference Rm{William Robotham - Chief Engineer}/HH.3/SW.6.6.41., the following parts have been detailed in accordance with the above scheme :-

RF.2517 Housing - Bump Rubber. 2 Off
RF.2518 Bump Rubber. 2 "
RF.2519 Rebound Rubber. 2 "

The following standard parts will also be required :-

K.{Mr Kilner} 4310 Nut - Bump & Rebound Rubbers 4 Off
K.{Mr Kilner} 9008 S.Washer " " " 4 "

This completes our instructions for the above scheme, and the piece numbers have been added to the scheme.

Rm{William Robotham - Chief Engineer}/HH. Hde
  
  


Copyright Sustain 2025, All Rights Reserved.    whatever is rightly done, however humble, is noble
An unhandled error has occurred. Reload 🗙