Rolls-Royce Archives
         « Prev  Box Series  Next »        

From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Wheel and tyre size changes for the 'SS' model to lower the car for French conditions.

Identifier  ExFiles\Box 17\7\  Scan008
Date  1st September 1928
  
Hs.{Lord Ernest Hives - Chair} from DA{Bernard Day - Chassis Design}/EV.{Ivan Evernden - coachwork}

77810.

c. to EY. SG.{Arthur F. Sidgreaves - MD}

DA{Bernard Day - Chassis Design}/EV{Ivan Evernden - coachwork}1/MS.9.28.

---

'SS{S. Smith}'. X.7770 X.7380
X.7820 X.615
X.7810

The first SS.{S. Smith}, which R.{Sir Henry Royce} hopes to have in the south of France, will have a 4-seater saloon cabriolet body of rather slim appearance.

With a view to getting the car as low as possible R.{Sir Henry Royce} has agreed to use 20" rims with 6.75" tyres, in the place of the present21" rims with 6.75" tyres, for this car only. The frame height will then be 21" above the ground when the chassis is under full load, against the present Phantom's 22.5".

If we find our improved gna ground clearances on 'SS{S. Smith}' make these smaller wheels possible for French conditions such as occur around Le CanadelHenry Royce's French residence, it is suggested that we might be able to use these wheels as standard, and the larger ones only for Colonial conditions.

Would Derby arrange to get a set of six of these wheels.

DA{Bernard Day - Chassis Design}/EV.{Ivan Evernden - coachwork}
  
  


Copyright Sustain 2025, All Rights Reserved.    whatever is rightly done, however humble, is noble
An unhandled error has occurred. Reload 🗙