Instruction for a billet of AC.6 bearing material to be cast, along with shims, detailing dimensions and heat treatment.
| Identifier | ExFiles\Box 115\3\ scan0035 | |
| Date | 18th August 1937 | |
| To HPS. {Horace Percy Smith - Experimental Factory Mgr} Rm {William Robotham - Chief Engineer} /Swdl. {Len H. Swindell} 8/JH.18.8.37. 1020 BEARINGS. Will you please instruct for a billet of AC.6 bearing material to be cast, suitable for making 2 complete bearings to the following rough machined dimensions. Outside dia. 4.5". Inside dia. 4.0". Width 1.625". In this condition to be given a heat treatment of 12 hrs. by Hl. and after inspection to note that the material is free from porosity to be despatched to :- Mr.P.Berthon. E.R.A.Ltd., Bourne, Lincs. In conjunction with the above bearing 4 shims in R R. {Sir Henry Royce} 56 to the following dimensions to be despatched. Length 1.625. Width 1.250. Thickness .100 +2. The above are urgently required and instructed on O {Mr Oldham} /N.54307. Rm {William Robotham - Chief Engineer} /Swdl. {Len H. Swindell} | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).