Rolls-Royce Archives
         « Prev  Box Series  Next »        

From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Standardisation of chassis parts by dropping the radiator and incorporating thermostatic shutters.

Identifier  ExFiles\Box 39\4\  Scan250
Date  20th October 1931
  
RR 755 (10H) (8459. 24-10-30) 6/3185.
X3499 COMPLETED 15.12.31
STANDARDISATION of CHASSIS PARTS.
Date 20.10.31
X No. 5250 3499
Drawing No. 6956
Part List IOP 58831
N.Sch. 3313
Description of Parts. RADIATOR DROPPED 4" IN FRAME INCORPORATING THERMOSTATICALLY OPERATED SHUTTERS.
Origin. Bottom plate milled away to prevent stones jamming shutters.
Experimental Test Report. Fitted to 18-G-IV for tests in France. The scheme is an improvement and should help to prevent shutters jamming by small stones. Gives wider gap between apron and shutters.
Road Test Report. Fitted to 18-G-IV No mileage run.
A Scrap and replace at all costs, including Chassis already delivered to Customers.
B Scrap and replace on Chassis in Works.
C Scrap present stock and replace on all Chassis not yet handed to test.
D Use existing stock Alteration effective on future Chassis.
Weight of Old Part. £
Weight of New Part. £
Difference per Car. £
Cost of Old Part. £ Milling
Cost of New Part. £ - 1-4 bottom plate
Difference per Car. £ - 1-4 Increase. only.
Cost of Parts in Works which will be scrapped if commenced on :-
Series..........£..........
Series..........£..........
Series..........£..........
Signature from Cost Dept. that above is correct S/Roll.12.31 G12.12.31
INITIAL    DATE    REMARKS
SG{Arthur F. Sidgreaves - MD}    14.12.31    Agreed Sg.{Arthur F. Sidgreaves - MD}
R.{Sir Henry Royce}    23.10.31    Agreed FHR.
WOR.{Arthur Wormald - General Works Manager}    21.10.31    Agreed Wor.{Arthur Wormald - General Works Manager}
C.    22.10.31    Agreed C.
RG.{Mr Rowledge}    23.10.31    Agreed Rg.{Mr Rowledge}
DA.{Bernard Day - Chassis Design}    23.10.31    Agreed Da.{Bernard Day - Chassis Design}
BY.{R.W. Bailey - Chief Engineer}    21.10.31    Agreed By.{R.W. Bailey - Chief Engineer}
EP.{G. Eric Platford - Chief Quality Engineer}    24.10.31    Agreed EP.{G. Eric Platford - Chief Quality Engineer}
E.{Mr Elliott - Chief Engineer}    4.11.31    Agreed E.{Mr Elliott - Chief Engineer}
PN.{Mr Northey}    26.10.31    Agreed Pn.{Mr Northey}
HS.{Lord Ernest Hives - Chair}        Agreed Hs.{Lord Ernest Hives - Chair}
[STAMPED] 25 H.P. CHASSIS PHANTOM
  
  


Copyright Sustain 2025, All Rights Reserved.    whatever is rightly done, however humble, is noble
An unhandled error has occurred. Reload 🗙