Rolls-Royce Archives
         « Prev  Box Series  Next »        

From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Design work and patents for a semi-expanding carburetter and a shock damper.

Identifier  ExFiles\Box 179b\1\  img122
Date  22th October 1932
  
FROM R.{Sir Henry Royce}
TO MR. H.R.
ORIGINAL
DESIGN WORK, & PATENTS.
R2/W21.10.32.
Sent off 26.10.32.
x39778
50
OCT 22 1932
I have been slowing up on design work for a short time in the hope of getting better in health. This plan has been a considerable success, and I hope to go ahead again shortly. In the meantime I think W.R. has not done badly in producing something for future cars, although we have failed to make any progress on the compression ignition work.
I hope BY.{R.W. Bailey - Chief Engineer} has the following schemes fairly well protected, to last for about 4 years:
(1) SEMI-EXPANDING CARBURETTER.
This has not been done by anyone in quite the same way previously to our attempt as far as we know. I need not repeat all the special features, but it mainly consists of a fixed carburetter up to about half the capacity, and an expanding carburetter the other half. In expanding the carburetter we give not only extra air in such a way as to give a central core of fuel surrounded by the air, but we give extra fuel in the main diffuser jet. We do this in conjunction with throttle edge carburation and our double piston type of air chamber. The needle valve need never touch the sides of the measuring orifice, and so there should be no wear of the gauge needle.
As all the parts below the expanding half are stationary the permanence of the setting should be absolutely reliable.
One can easily see that possibly this scheme is better than anything previously produced. It is probable that when it has been redesigned a few times it will be quite passably simple and a great deal more convenient than double carburetters, which appears to be the only thing that can approach it on a 6 cyl. engine.
(2) SHOCK DAMPER.
This item has been slowly evolved at W.R. with the help of the Derby Expl. Dept., and should now be within sight of becoming one of the most reliable and permanent shock dampers.
It has a single valve which is more capable of control etc than those fitted with 2, 3, and 4, valves. We are adding to this a system of oil control which has the additional merit of being automatic. We have no doubt that this scheme will be found quite reliable and practical. It naturally takes more time than
(1)
  
  


Copyright Sustain 2025, All Rights Reserved.    whatever is rightly done, however humble, is noble
An unhandled error has occurred. Reload 🗙