From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Blueprints for the Rippletto Chassis frame and fittings.
| Identifier | ExFiles\Box 113\5\ scan0127 | |
| Date | 11th April 1940 | |
| To Rm{William Robotham - Chief Engineer} Clutch-Div (struck through) File Clm{D. D. Clapham} 1010 Rm{William Robotham - Chief Engineer}/HH2 /11.4.40. Rippletto Chassis. Frame and Fittings Sec 7000 2nd Crossmember to PL 119. Please receive herewith 3 blueprints of each of the following:- RF 753 Frame Stiffening Gusset-Rear-RH{R. Hollingworth}- 1 off RF 754 " " " -LH{Mr Haworth}- 1 off RF 755 2nd Crossmember- 1 off RF 756 Support Bracket for Filter- 1 off These parts go to make up the frame as supplied by the frame makers, and complete the major details. When they have been produced, the frame can be built up. We have in hand a drawing of the frame in its assembled condition, and this will be issued in the course of a few days. Also attached are 2 blueprints of PL 119, LOP and scheme. With reference to RF 756- Filter Support Bracket, it is not intended that this should be produced at present. Rm{William Robotham - Chief Engineer}/HH. | ||