Specification sheet for the Bensport model detailing various chassis components.
| Identifier | ExFiles\Box 142\2\ scan0206 | |
| Date | 4th February 1933 guessed | |
| BENSPORT(Codename for 3 1/2-litre Bentley) SPECIFICATION. Frames and Fittings. - Bensport(Codename for 3 1/2-litre Bentley) Side Channels. Crossmembers as on LeG.3280. Wings outside Valance and - As on first Experimental Running Board. Chassis. Front Apron - No Design. Frames Ties - Not required. Front Springs & Fittings - Peregrine(Experimental Bentley car never produced / Aero Engine) type with Bensport(Codename for 3 1/2-litre Bentley) Poundage. Rear Springs & Fittings. - Peregrine(Experimental Bentley car never produced / Aero Engine) type with Bensport(Codename for 3 1/2-litre Bentley) poundage. Steering Column & Box C.D.E.&F.Type. - As on first Experimental Chassis. Klaxon Switch on Steering Column - As on first Experimental Chassis. Side Steering Tube. - As on first Experimental chassis. Petrol Tank - Peregrine(Experimental Bentley car never produced / Aero Engine) used. Pedals C.D.E.A F.Type - Hold up. Pedals & Operating Gear for Starting Motor. - Hold up. Dash Brackets & Footboards C.D.E.& F.Type. - Bensport(Codename for 3 1/2-litre Bentley) Design. Autovac & Piping. - Not required. Oil Pump on dash. - Luvax Pump used. Oil Pipes & Fittings. - Luvax Fittings. Rear Shock Damper - J.III Type without controls. Front Shock Damper - J.III Type without controls. Horn & Fittings - Hold up. Spanners & Tools - To suit chassis Spares - To suit chassis. Battery Box - Peregrine(Experimental Bentley car never produced / Aero Engine). | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).