From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Requesting prints of 'Launching Winch' designs be made for archival purposes due to the project being put on hold.
| Identifier | ExFiles\Box 175\2\ img116 | |
| Date | 29th April 1941 | |
| 2006 To Mr. From Mr/JB. Copy to Mr. RM{William Robotham - Chief Engineer}/Hd.{Mr Hayward/Mr Huddy} LAUNCHING WINCH. ---------------- As all work on the winch is likely to be held up for a time, we feel that prints should be obtained from the projects that we had almost completed, for record purposes, in case of fire due say to enemy action. Although most of these designs are now incorrect due to later developments, there is a lot of ground work done that we should not like to lose. Will RM{William Robotham - Chief Engineer}/Hd.{Mr Hayward/Mr Huddy} please therefore obtain prints of the following for Mr. RM{William Robotham - Chief Engineer}/Hd.{Mr Hayward/Mr Huddy} and Ashby, and return the original to Mr/JB. PL.508 - Arrangement of Winch on a 5 ton R.A.F. Trailer Chassis - 2 sheets. PL.511 - Drum for Wire Cable - Winch. PL.514 Screw Gear for Drum Winding Carriage. PL.545 - Flanges connecting Driving and Driven Units to Fluid Coupling. PL.660 - Reduction Gear - Winch. PL.661 - Gear Paying in Rollers and Cable Brake - Winch. PL.662 - Alternative Cable Brake - Winch. PL.663 - Drum Winding in Carriage - Winch. Mr/JB. | ||