From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Additional note for the specification of production inspection and test for a distribution board and cutout.
| Identifier | ExFiles\Box 50\1\ Scan201 | |
| Date | 14th May 1925 | |
| X.8781db.{Donald Bastow - Suspensions} RR. DISTRIBUTION BOARD & CUTOUT. X.8740. SPECIFICATION OF PRODUCTION INSPECTION & TEST. ADDITIONAL NOTE. Referring to (1) (a), and in particular to the inspection of the cutout contact surfaces for correct alignment, it is intended that there shall be a definite rubbing action between the points after making and before breaking. This can scarcely occur satisfactorily if the axis of the cylindrical surface of the moving contact point is level with or lower than that of the fixed contact point (i.e. in position on the dash). It should therefore be arranged that the moving contact points is slightly higher, in which case it will be observed that a definite rubbing action will occur. The point is that the definite rubbing action is definitely intended, but the possibility of the rubbing action when the points are in exact alignment is largely defeated by the flexibility of the top portion of the spring carrying the moving contact point. EFC. | ||