Rolls-Royce Archives
         « Prev  Box Series  Next »        

From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Substitution of a rolled eye for a solid eye on the Phantom II Rear Axle Spring to reduce costs.

Identifier  ExFiles\Box 16\7\  Scan238
Date  4th February 1930
  
Copy

To Hs.{Lord Ernest Hives - Chair} from ROY.{Sir Henry Royce}
C. to Wor.{Arthur Wormald - General Works Manager}
C. to BX
C. to HY{Tom Haldenby - Plant Engineer}
-----------

ROY{Sir Henry Royce}13/MG4.2.30
-----------

You will recollect some two months ago we discussed in Wor{Arthur Wormald - General Works Manager}'s room the advisability of substituting a rolled Eye on the PHANTOM II Rear Axle Spring instead of a solid Eye, the idea originating, I believe, at Mr. Royce's suggestion that our costs on such Axle Springs could be materially reduced by such substitutes.

It was then agreed the matter should be pushed all possible, and the object of this note is to ask if Standardisation Sheet can now be circulated covering same, and if not, when it is probable, as we are still buying such PHANTOM II Rear Axle Springs from Messrs. Firth with solid eyes back and front, the net result being our costs are still excessively high.

ROY{Sir Henry Royce}

ENCLOSURE
Nº 877
"JUSTSO"
  
  


Copyright Sustain 2025, All Rights Reserved.    whatever is rightly done, however humble, is noble
An unhandled error has occurred. Reload 🗙