Rolls-Royce Archives
         « Prev  Box Series  Next »        

From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Instruction to add two clips to the bonnet for a Bentley 5, following a recommendation from Messrs. Park Ward.

Identifier  ExFiles\Box 98\3\  scan0165
Date  12th July 1939
  
405
BY/NS.{Norman Scott}
c. Rm.{William Robotham - Chief Engineer}
c. Da{Bernard Day - Chassis Design}/JD.{J. Draper - Frames}

DA.{Bernard Day - Chassis Design}5/G.12.7.39.

BENTLEY 5. BONNET.

When fitting the bonnet to 8.B.5. Messrs. Park
Ward found it an advantage to add two clips on the lower
edge of the bonnet, to clip over the bonnet face plate.

The position and particulars of the clips are
marked 'A' on F.CD.1198.

Please instruct them to be added to the bonnet
side plate as soon as possible.

DA.{Bernard Day - Chassis Design}
  
  


Copyright Sustain 2025, All Rights Reserved.    whatever is rightly done, however humble, is noble
An unhandled error has occurred. Reload 🗙