From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Drawing of an outer casing abutment with a taper nose for car brake cables.
| Identifier | ExFiles\Box 120\2\ scan0025 | |
| Date | 10th June 1936 | |
| DRAWG.WB{Mr Brazier/Mr Bell} 5754/2. NOTE No. NOTES 1. TAPER MUST SHOW 75% CONTACT ON RING GAUGE. C.A. No. DESCRIPTION A.U. No. ISSUED 10 JUN 1936 DRAWING OFFICE B. E.{Mr Elliott - Chief Engineer} LTD. BOWDEN (ENGINEERS) LTD., VICTORIA ROAD, WILLESDEN JUNCTION, LONDON. N.W.10 TITLE: OUTER CASING ABUTMENT WITH TAPER NOSE FOR: CAR BRAKE CABLES T.G.H. MODIFICATIONS DESCRIPTION | DATE LIMIT ON OUTER CASING HOLE FROM .501 TO .511 DIA | 30/4/31 NOTE 1 - PART OF NOTE DELETED | 2/2/34 A .509" TO .504" | 4/7/34 B .502" TO .500" C .500" TO .498" | 11/5/34 D WAS 12FT. | 19/1/35 No. OFF: 1 PER CABLE. MATERIAL: 13FT OF 5/8 DIA M.S. ROD (PER 100) SPEC N. MACHINE FINISH: MACHINE. NOTE: THIS DRAWING MUST NOT BE SCALED. ALL UNLIMITED MACHINING DIMENSIONS TO BE WITHIN .004 OR ± .002 INCH HIGH F/S. DRAWING OFFICE BOWDEN (ENGINEERS) LTD. DRAWN: G.W.C. 10/6/36 CHECKED: [signature] DRG WB{Mr Brazier/Mr Bell} 5754/2 Drawing Annotations: NOTE 1 10° INCL: 17/64 DIA HOLE C/SINK TO 3/8" DIA AT 60° INCL: .500 DIA .495 9/16" TO SHOULDER 1 5/16" 5/8" 1/4" DIA HOLE ⊕ .500" DIA .498" HOLE 5/8" DIA C/SINK TO 17/32" DIA AT 60° INCL: 1/32" CHAMFER AT 45° | ||