From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Specification sheet for vehicle components including tools, interior lamp, wheel discs, and body weight.
| Identifier | ExFiles\Box 117\4\ scan0269 | |
| Date | 29th February 1944 guessed | |
| - 5 - 28) Tools. Road tools to be housed as specified by Rolls-Royce. Small tools to be carried in a tool drawer under the L.H. side of the instrument board. 29) Interior Lamp. Roof lamp circular type with concealed fixing and fitted with festoon bulb ex. Wilmot-Breeden. Lamp to be operated by push type midget switch on the instrument board. Lamp also to be wired to illuminate the interior when either one or both of the nearside doors are open. 30) Wheel Discs. Cornercroft discs - see chassis. 31) Petrol Filler. To Rolls-Royce design. Access as specified under item 3. 32) Rolls-Royce Mascot. Ex. Rolls-Royce. 33) Front Apron. To Rolls-Royce design. 34) Ash Trays. Two semi-circular flush type ash trays fitted to instrument board. One ash tray of the same type to be fitted to the front of each rear seat side armrest. 35) Cigar Lighter. Type to be approved and fitted on the instrument panel or board. 36) Weight. The body to be as light as possible consistent with strength and best workmanship. Nominally the finished body weight should not exceed 900 lbs. ----- Pm/EC. | ||