From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Proposal for mounting hydraulic shock dampers on the rear axle of a 20HP model.
| Identifier | WestWitteringFiles\Q\April1927-June1927\ 20 | |
| Date | 14th April 1927 | |
| TO BY.{R.W. Bailey - Chief Engineer} FROM DA.{Bernard Day - Chassis Design} ORIGINAL DA{Bernard Day - Chassis Design}2/M14.4.27. C. to - BJ. HS.{Lord Ernest Hives - Chair} 20HP. HYDRAULIC SHOCK DAMPERS ON REAR AXLE. X235 X5520 X7520 With reference to the difficulty of utilising a spring gland in this position on the 20HP., we send herewith N. sch. 2397. shewing a proposal for mounting the shock damper in the same way as on EAC.7. If this is done, and the gland is slightly shortened compared with the Phantom, we think we can give sufficient clearance on either side. It will be noticed that the shock damper body is different to the present Phantom, though it is the same as that proposed for EAC.7. except for the position of the filler boss. For the purposes of experiment an EAC.7. body casting could be used. We suggest that a set should be rigged up to this scheme for test as soon as possible. DA.{Bernard Day - Chassis Design} | ||