Rolls-Royce Archives
         « Prev  Box Series  Next »        

From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
The design of a Bentley 50 wheelcase and its oil supply nozzle.

Identifier  ExFiles\Box 114\3\  scan0227
Date  18th March 1938
  
B.I/MS. [crossed out]
c. to Rm.{William Robotham - Chief Engineer}
1013
DA.{Bernard Day - Chassis Design}4/C.18.3.38.
Perles SWDL{Len H. Swindell}
BENTLEY 50. WHEELCASE.
Please receive herewith
E.CD.533 Wheelcase - Bentley 50.
The design also shows the oil supply nozzle
to timing gears which is connected to the low pressure
oil supply, the oil piping will be shown on a later
design. The wheelcase is intended to be produced as
a die casting in aluminium.
An alternative one piece nozzle is shown on
drawing and the least costly nozzle of the two should be
detailed.
Will you please detail and instruct the
necessary parts experimentally.
DA.{Bernard Day - Chassis Design}
  
  


Copyright Sustain 2025, All Rights Reserved.    whatever is rightly done, however humble, is noble
An unhandled error has occurred. Reload 🗙