From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
General arrangement of a Marles steering gear, type 461 R.H.
| Identifier | ExFiles\Box 153\4\ scan0103 | |
| Date | 5th November 1940 | |
| P 1756, P 2584, P 3209, P 3220, P 2520, PA{Mr Paterson} 3205, OA 2490, P 3206, Q 2487, Q 381, S 3204, S 9052, PA{Mr Paterson} 2490, P 2487, P 3206, S 3222, S 902, P 3623, P 3275, S 914, P 3685, P 3202, P 3203, S 999, P 3676, PA{Mr Paterson} 3679, P 3218, P 3219, P 3772, P 2433, Q 324, Q 323, S 932, S 9146. TO SUIT 9/16" 2 3/16" WHEEL BOSS No 8 DIA .561"/.562" APPROX 1 5/16" DIA 1 1/8" DIA OUTER TUBE BLACK ENAMEL. NOTE:- OUTER TUBE AT STEERING WHEEL END ONLY 1 5/16 DIA. FOR 1 3/4 LONG. 2 13/16" 21/32" 80° ANGULAR MOVEMENT. CLAMPING BRACKET SHOULD BE BORED TO NEWALL 'B' LIMITS. ADAMANT STANDARD SERRATED CONE. 1 1/8" 1/4" DROP ARM BOSS 7/8" BSF 1" DIA 1.8745"/1.873" DIA. 2 3/4" STANDARD LENGTH. 3 3/4" STANDARD LENGTH. 4 9/16" STANDARD LENGTH. 5 29/32" STANDARD LENGTH. 1 3/16" CONSTANT FOR ALL LENGTHS OF SHAFTS. THIS DESIGN OR DRAWING IS NOT SOLD OR GIVEN, BUT LOANED. IT REMAINS THE PROPERTY OF ADAMANT ENGINEERING CO. LTD. AND IS SUBJECT TO THEIR RECALL. IT MUST NOT BE LENT, COPIED, OR REPRODUCED WITHOUT THEIR PERMISSION. ISSUED 11 JUN 1941 DRAWING OFFICE ALTERNATE OIL FILLER POSITION. GENERAL ARRANGEMENT OF MARLES STEERING GEAR 461 TYPE R.H. ADAMANT ENGINEERING CO LTD LUTON. DRAWING No. GA3706 DATE 5-11-40 DRAWN CHECKED REPLACED BY DRAWING No. | ||