Rolls-Royce Archives
         « Prev  Box Series  Next »        

From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Suggestions for increasing the stiffness of the 20 HP side spare wheel carrier.

Identifier  ExFiles\Box 103\5\  scan0090
Date  22th June 1939
  
SECRET.
By.{R.W. Bailey - Chief Engineer} from DA.{Bernard Day - Chassis Design}
X5600
DA{Bernard Day - Chassis Design}1/M22.6.39.
Copy to Sg.{Arthur F. Sidgreaves - MD} Hs.{Lord Ernest Hives - Chair}
20 HP. SIDE SPARE WHEEL CARRIER.
X5600
We send herewith N. scheme 2914. on which we have indicated some suggestions for increasing the stiffness.
(1) Some sheet metal stiffeners somewhat as indicated to convey the torsion from th wheel carrier on to the engine foot which is able to resist it. Incidentally the sheet metal also stiffens the flat web of the frame.
(2) Should (1) not be successful we then suggest trying the SS.{S. Smith} tubes and fittings which will go on to the same tube centres.
(3) Only as a last resort experimentally trying a stay between the top of the tubes and the dashboard. We fear however this will be criticised from the point of view of appearance, and shall only send a design for it with reluctance.
DA.{Bernard Day - Chassis Design}
  
  


Copyright Sustain 2025, All Rights Reserved.    whatever is rightly done, however humble, is noble
An unhandled error has occurred. Reload 🗙