Improving condenser contacts to achieve a more certain metallic connection.
| Identifier | WestWitteringFiles\J\May1923\ Scan71 | |
| Date | 28th May 1923 | |
| EFC {E. Fowler Clarke - Electrical Engineer} 2/T28.5.23. -2- Contd. Could we not have a design which would give more certain metallic connection ? In the meanwhile we are hoping to improve the contacts on these parts by having a piece of presspan on each side of the condenser for a limited extent on each side of the centre line, this bringing a more definite and concentrated pressure on the contact than the original method where the presspan was the width of the condenser itself, and was used on one side only. EFC. {E. Fowler Clarke - Electrical Engineer} | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).