From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Modifications to the pressure distributing gear for 40/50 four-wheel brakes.
| Identifier | WestWitteringFiles\K\November1923\ Scan121 | |
| Date | 22th November 1923 | |
| TO BX.) FROM DA.{Bernard Day - Chassis Design} HS.{Lord Ernest Hives - Chair}) ORIGINAL DA{Bernard Day - Chassis Design}1/M22.11.23. c. to OJ. 40/50 FOUR WHEEL BRAKES. X9940 We send herewith a sketch - N.scheme 1704 - shewing how the existing pieces of the pressure distributing gear may be modified and re-arranged so as to eliminate the self binding. Practically all the existing pieces are used, most of them without modification at all, but the annulus will have to be shifted a little to one side to enable the thicker flange on the L.H. side of the planets to be got in. It will be necessary in this particular case to take care to get the planets cage true, and when the distance pieces have been made as accurate as possible, then the new planet cage shafts might be trued up by grinding. after assembly. The pull off spring will have to be re-arranged and might be anchored to this new aluminium bracket we shew. We think you know that Mr. Royce wishes you to provide some slotted levers or levers drilled wi' more than one place. operating the front brakes and 'servo' motor, and by altering the lengths determine the best leverage for the two parts of the gear. It will be noticed that we now wish the sun wheel to float without bearings in the centre and be carried by a bush in the planet cage shaft close to its operating lever. We are sending you in the course of a day or two a more finished scheme. DA.{Bernard Day - Chassis Design} | ||