From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Measurements of Bentley pistons in a new cylinder block, questioning a potential modification.
| Identifier | ExFiles\Box 131\4\ scan0294 | |
| Date | 12th June 1937 | |
| 1113 To, Rm.{William Robotham - Chief Engineer} from Rm{William Robotham - Chief Engineer}/GWH.{George W. Hancock - Head Chateauroux} Kingsbury. June 12th.1937 BENTLEY PISTONS. I believe these pistons are bought outside but whether RHC.{R. H. Coverley - Production Engineer} Inspectors check them I am not aware. Kingsbury have just received a new cylinder block complete with pistons. The pistons being measured up were found to be taper on the skirt portion, and the bottom edge of the pressures side were exactly 3.5 inches tapering up to minus .004" at the top of the skirt. They have usually .003" clearance at the bottom of the skirt. Fitting the pistons in the bores they were on the tight side, for approximately .5 up the skirt. Will you please say whether this is a later modification. Rm{William Robotham - Chief Engineer}/GWH.{George W. Hancock - Head Chateauroux} [Diagram Measurements] 3.46 3.47 3.48 3.49 3.5 | ||