From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Specification sheet detailing parts for the flywheel, clutch, suspension, and frame.
| Identifier | ExFiles\Box 98\5\ scan0158 | |
| Date | 30th December 1938 | |
| -4- Rm{William Robotham - Chief Engineer}/Cr.{Mr Cra???ster / Mr Chichester}2/MH.{M. Huckerby}30.12.38. FLYWHEEL & CLUTCH. GCD.1065 (C.I. engine). PEDALS. AIR SILENCER. Centre outlet, Twin filter units to ECD.530. EXHAUST SYSTEM. ECD.944/968/969/975. SUSPENSION FRONT. Springs FB.3826, 8" deflection. Upper yoke bearing. Silentbloc without rolled ends. Lower yoke bearing. Silentbloc FCD.915. Stiffened yoke PD.129. Front damper as latest LOP. (glands, perfect oil seals, knurled shafts, side valves, no bellows, no pipes to front dampers). Roll rod FCD.767, 794. 11/16" dia. in BESA/S.76. Thrust stay PD.325. Torque arm PD.325. Lower triangle lever PD.325. Simplified front nubs. PD.291. SUSPENSION REAR. Springs FB.3922. To be supplied and ordered by Rm{William Robotham - Chief Engineer}/AFR. Threaded front anchorage rear spring, FCD.642. Damper fixing FCD.677. Spring shackle PD.339. Locating screw threaded bushes FCD.852. Riding control ECD.819/20. Dampers R.R. type. Valve specification later. Spare wheel carrier FCD.993. Duprene washers for anchorage pins. FRAME. On order to Roy{Sir Henry Royce}/les's instructions Arr. FB.3658. The frame is effected by PD.335 which is the new scheme for the petrol tank and spare wheel mounting. | ||