Rolls-Royce Archives
         « Prev  Box Series  Next »        

From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Parts for the M.40 Test Rig, focusing on the frame, front pan, and handbrake.

Identifier  ExFiles\Box 109\3\  scan0137
Date  27th May 1941
  
To Rm.{William Robotham - Chief Engineer} from Rm{William Robotham - Chief Engineer}/HH.
c. to Ev.{Ivan Evernden - coachwork}
c. to Ev{Ivan Evernden - coachwork}/JD.{J. Draper - Frames}

700

Rm{William Robotham - Chief Engineer}/HH.1/SW.27.5.41.

M.40 Test Rig.

PL.436 - Front Pan.
PL.504 - Handbrake Lever & Mech.

Section 7000 - Frame & Fittings.

The following parts have been detailed in accordance with the above schemes :-

RF.2426 Front Pan - Centre 1 Off
RF.2427 Front Pan - End - (RH{R. Hollingworth}) 1 Off
RF.2428 Front Pan - End - (LH{Mr Haworth}) 1 Off
RF.2429 Mounting Bracket (RH{R. Hollingworth}) - Front Pan 1 Off
RF.2430 Mounting Bracket (LH{Mr Haworth}) - Front Pan 1 Off
RF.2431 Bottom Plate - Front Pan 1 Off
RF.2432 Tube Support - Bottom (Rear RH{R. Hollingworth}) 1 Off
RF.2433 Tube Support - Bottom (Rear LH{Mr Haworth}) 1 Off
RF.2434 Tube Support - Bottom (Front RH{R. Hollingworth}) 1 Off
RF.2435 Tube Support - Bottom (Front LH{Mr Haworth}) 1 Off
RF.2436 Bracket - Engine Mounting. 2 Off
RF.2437 Stiffener (Outer) - Spring Seating. 2 Off
RF.2438 Stiffener (Inner) - Spring Seating. 2 Off
RF.2439 Stiffening Plate - Brake Rack. 1 Off
RF.2259 (Sheet 2) Assembly of Frame - Front Pan.

Further details on the above schemes, will be issued later.

We attach to Ev{Ivan Evernden - coachwork}/JD{J. Draper - Frames}'s copy of this memo, one blueprint of each of the above details together with a revised print of RF.2259 (Sheet 1), which has had RF.2439 - Stiffening Plate, added on the inside of the R.H. channel.

We also attach to Ev{Ivan Evernden - coachwork}/JD{J. Draper - Frames}'s copy, one blueprint of RF.2259 - LOP. for Frame Makers Assembly. This LOP. calls for all the parts for the frame, and which have now been issued.

Rm{William Robotham - Chief Engineer}/HH.

[Signature]
  
  


Copyright Sustain 2025, All Rights Reserved.    whatever is rightly done, however humble, is noble
An unhandled error has occurred. Reload 🗙