Rolls-Royce Archives
         « Prev  Box Series  Next »        

From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Analysis of crankshaft oscillations, vibrations, amplitude and stress at various speeds.

Identifier  ExFiles\Box 6\1\  01-page012
Date  1st September 1926 guessed
  
contd :-
-9-
If we multiply together the r.p.m. and the number of oscillations on these diagrams, we get the frequency of oscillations per minute. It will be found from the diagrams that this is roughly a constant for all those given being between 9600 and 10050 oscillations per minute or 160 and 167.5 oscillations per second. The difference could be accounted for by slight error in the speed giving the maximum amplitude.
This is good evidence that the crankshaft is vibrating with its natural period and quite in accordance with the statement that the amplitude will depend upon the relation of the frequency of the disturbing force and the free period of the crankshaft.
Another point observed is that the speeds giving the most vigorous vibrations bear roughly the ratio 1/2, 1/3, 1/4, to the critical speed.
Before passing from this we see that at speeds of 500 and 2000 r.p.m. there are no appreciable vibrations also at other speeds but no diagrams are given.
With regard to the amplitude of the oscillations we estimate from the diagrams by considering the lever ratio of the scriber that the 3350 one has an amplitude of approximately 3° 49' or 1° 54' each side of its mean position.
From a crankshaft deflection curve, which follows, we see that this deflection would give rise to the static stress produced by a torque of 540 lbs.ft. at the end of the crankshaft. The actual stress would be higher than the static due to its alternating nature.
At 1600 r.p.m. - and being a better diagram we are able
contd :-
  
  


Copyright Sustain 2025, All Rights Reserved.    whatever is rightly done, however humble, is noble
An unhandled error has occurred. Reload 🗙